Demeter Technologies MirrAl Aluminum Oxides are an excellent base for polishes and glazes for automotive clearcoat finishes. They can be used for OEM, body shop, detailing and DIY. Powder or slurry forms are available. The size and hardness of the particles can be customized to match your specific formulation. The particle size distribution is carefully controlled to optimize cut and surface finish while providing stable viscosity, good handling properties, low dusting and easy cleaning. Our aluminas work equally well with natural and synthetic polishing pads and with both rotary and dual action polishers.
Demeter Products
Aluminum Oxides for Automotive Finishes
Demeter Technologies MirrAl Aluminum Oxides are an excellent base for polishes and glazes for automotive clearcoat finishes. They can be used for OEM, body shop, detailing and DIY. Powder or slurry forms are available. The size and hardness of the particles can be customized to match your specific formulation. The particle size distribution is carefully controlled to optimize cut and surface finish while providing stable viscosity, good handling properties, low dusting and easy cleaning. Our aluminas work equally well with natural and synthetic polishing pads and with both rotary and dual action polishers.
| Cut Rate | Haze | Hardness | Particle Size | Solids Content | pH(15%) | ||
| 10= High Cut | 1= Low Haze | 10 (Hard) | D50(µm) | D100(µm) | |||
| Fine Polish | |||||||
| YL-97 | 2 | 1 | 2 | 0.3-0.5 | <3 | 29-31% | 6.5-8.5 |
| YL-98 | 2 | 1 | 2 | 0.8-1.0 | <8 | 29-31% | 6.5-8.5 |
| YL-37 | 3 | 1 | 5 | 0.9-1.3 | ≤10 | 29-31% | 8.0-10.0 |
| YL-20 | 4 | 2 | 2 | 1.4-1.6 | ≤10 | 29-31% | 10.5-11.5 |
| DA 106 S | 4 | 2 | 2 | 1.4-1.6 | ≤10 | 29-31% | 7.0-9.0 |
| YL-14 | 2 | 2 | 4 | 1.3-1.7 | ≤10 | 29-31% | 8.0-10.0 |
| YL-15 | 3 | 2 | 5 | 1.3-1.7 | ≤10 | 29-31% | 8.0-10.0 |
| Good Cut/Fine Finish | |||||||
| YL-72 | 3 | 3 | 3 | 2.0-2.4 | ≤20 | 29-31% | 8.0-9.5 |
| YL-11 | 4 | 3 | 3 | 2.5-3.5 | <15 | Powder | 9.5-10.5 |
| YL-13 | 5 | 3 | 5 | 3.1-6.1 | <50 | Powder | 9.5-10.5 |
| YL-9 | 5 | 3 | 7 | 3.0-4.5 | ≤15 | Powder | 8.0-10.0 |
| Rapid Cut/Good Finish | |||||||
| DA 089 P | 6 | 3 | 8 | 5.0 – 7.0 | ≤40 | Powder | 8.0-10.0 |
| YL-2 | 6 | 5 | 8 | 6.0-9.0 | ≤50 | Powder | 9.0-11.0 |
| YL- 81 | 7 | 4 | 8 | 8.0-10.0 | ≤50 | Powder | 8.0-10.0 |
| YL-3 | 7 | 4 | 7 | 9.0-12.0 | ≤60 | Powder | 9.0-11.0 |
| High Cut | |||||||
| DA 096 P | 8 | 4 | 6 | 8.0 – 11.0 | ≤50 | Powder | 8.0-10.0 |
| DA 087 P | 8 | 5 | 7 | 8.0 – 11.0 | ≤50 | Powder | 8.0-10.0 |
| DA 097 P | 8 | 5 | 8 | 8.5-11.5 | ≤50 | Powder | 7.5 – 9.5 |
| YL-24 | 8 | 6 | 8 | 11-14 | ≤75 | Powder | 9.0-10.5 |
| YL-38 | 9 | 7 | 8 | 28-32 | ≤100 | Powder | 8.0-10.0 |
